Konuyu Oyla:
  • Derecelendirme: 0/5 - 0 oy
  • 1
  • 2
  • 3
  • 4
  • 5
Solar Panel manufacturers
#1
Centrifugal atomizer spray dryer introduction
300W-330W Poly-crystalline Solar Panel
· Two decades of experience in manufacturing, the complete PV chain of silicon materials, ingot, wafer, solar glass, solar cell and module, and ISO90001 & ISO14001 certified factory, to ensure excellent raw materials and production control.
· Modules certified by TUV Rheinland (IEC61215, IEC 61730 standards) in the extreme conditions (temperature, load, impact) with good performance. Pass strict tests of solar modules including Salt-mist Corrosion Test, Fire Test, Ammonia Resistance Test, PID Test, Sand Abrasion Test and Carbon Footprint Assessment in TUV.
· The good weak light performance (morning, evening and cloudy day) has been tested and approved by professional third-party.
· Guarantee from 0 to +6W as power tolerance, customers can obtain 5.8% power more than conventional output.
· 100% EL test before and after lamination, and finished products EL test, providing higher quality assurance.

Electrical Characteristics
Solar-cells:Mono-Crystalline    156×156mm
72pcs (6×12) —— 5 bus bars
Max-power300305310315320325330
Power tolerance0 to +6W
Voltage at pmax (Vmp)36.736.836.937.037.137.237.3
Current at pmax (Lmp)8.178.298.408.518.638.748.84
Open-circuit voltage (Voc)45.045.145.245.345.445.545.6
Short-circuit current (Isc)8.798.979.099.219.339.469.55
Max-system voltage (VDC)1000V(IEC),600v(UL)
Cell efficiency17.317.617.918.218.518.819.0
Module efficiency15.515.716.016.316.516.817.0
No.of bypass diodes (pcs.)3
Max.series fuse (A)15A
Temperature coefficient of pmax-0.45% / ℃
Temperature coefficient of voc-0.34% / ℃
Temperature coefficient of isc0.05% / ℃
Nominal operating cell temperature45±2 ℃
*STC Conditions (1000W/m²;1.5AM and 25℃ cell temperature)
Mechanical Characteristics
Cable type,diameter and lengthΦ=4mm², L=1000±5mm
Type of connectorCompatible type MC4
Dimension  A×B×C1956×992×50/45mm
Weight22.5/21kg
No.of Draining holes in frame16
ConstructionGlass: high transmission,Low lron,Tempered glass 3.2mm   Encapsulation:EVA   Back side:White
Junction boxIP67 Rated
FrameClear anodized aluminum alloy type 6063T5 frame
Qualification Test Parameters
Dielectric insulation voltage6000VDC max
Operating Temperature-40℃~+85℃
Max load5400Pa
Hailstone impact25mm(1inch) at 23m/s(52mph)
Fire ratingClass C
Packaging Configuration   1956×992×45mm
Packaging configuration22pcs/box and 2pcs/box
Loading capacity528pcs/40HQ    240pcs/20GPSolar Panel manufacturers
website:http://www.ecomattersenergy.com/solar-panel/
website:http://www.csspraydryer.com/spray-dryer/
Ara
Cevapla


Konu ile Alakalı Benzer Konular
Konular Yazar Yorumlar Okunma Son Yorum
  Patterned Duvet Cover Sets manufacturers astao85 0 114 19-09-2019, Saat: 09:18
Son Yorum: astao85
  China Wooden Gardenware manufacturers dwpyyy1 0 164 02-08-2019, Saat: 05:04
Son Yorum: dwpyyy1
  Car light manufacturers ddwwppyy1 0 165 25-06-2019, Saat: 05:34
Son Yorum: ddwwppyy1
  16 Ports Fast Ethernet Switch manufacturers ddwwppyy1 0 134 25-06-2019, Saat: 05:33
Son Yorum: ddwwppyy1

Hızlı Menü:


Konuyu Okuyanlar: 1 Ziyaretçi